Ad Clicks :Ad Views : Ad Clicks :Ad Views : Ad Clicks :Ad Views : Ad Clicks :Ad Views : Ad Clicks :Ad Views : Ad Clicks :Ad Views : Ad Clicks :Ad Views : Ad Clicks :Ad Views : Ad Clicks :Ad Views : Ad Clicks :Ad Views :
Home / Tips & Tricks / 6 Ways To Hang Curtains From The Ceilings

6 Ways To Hang Curtains From The Ceilings


Either you buy or have a Custom Made Curtain, hanging drapes from the ceiling may seem overwhelming, but it offers many advantages. For example, the additional height it provides may make your ceilings seem taller. Y

Utilizing the ceiling also allows you to partition rooms easily or make little corners in your house. Using brackets and a rod, similar to how you would hang curtains on the wall, is a straightforward method to install curtains. 

You may also utilize a tracked method with loops in conjunction with a curtain with tiny hooks, which works particularly well for a broad curtain. In this article, we will show you how to hang curtains from ceilings correctly.

How to Hang Curtains From The Ceilings

Find Ceiling Rod Brackets


Brackets designed for the wall will have a deeper “hook,” which may not be suitable for use on the ceiling. You may buy ceiling-specific ones online or at most house maintenance shops. Choose a rod that is 8 to 10 inches (20 to 25 cm) broader than your window.

When your brackets don’t include hollow wall anchors and have plaster ceilings, buy some molly bolts, as those are identical to the screws that came with your package. Screws work well when going into the wood, but you’ll need to secure the holes with something more challenging when working with plaster. 

If you’re unsure what to purchase, ask for assistance at a home repair store. Bring your brackets in so that people can see them. When you’re going to use anchors, be sure they’re strong enough to hold the weight you’re hanging up. Anchors are available in a variety of weight classifications.

Mark the Location of the Brackets

The brackets typically protrude 2 to 3 inches (5.1 to 7.6 cm) from the wall to prevent curtains from pressing against the window. The brackets should then be placed either directly at the window’s outside borders or 2 to 3 inches (5.1 to 7.6 cm) past the window’s ends on either side. With a pencil, mark the location of the brackets.

Remember that you want the curtain rod to stretch 4 to 5 inches (10 to 13 cm) on each side. However, the final design may influence how far the brackets extend from the window.

Once the designs are large, you may want to position the brackets close to the window’s width to extend caps beyond the bracket. Constantly check your markings by holding the rod up to them.

Make a pattern out of cardboard if you’re creating many windows of the same size. Make a mark on the cardboard where the window edges are and where you should drill the holes. You may then use it to determine where to dig above each window quickly.

Drill a Hole the Width of Wall Anchors

When your ceiling is plaster, you must use hollow wall anchors in more severe cases; you’ll drill a hole the same size as your anchors. Use an 18-inch (3.2-mm) drill bit if the anchor is that size. Grasp the bit and press it against the spot you’ve indicated. Turn on the drill and gently push it into the ceiling, ensuring sure it penetrates the plaster completely.

For every anchor, you need to install, drill a hole. Each loop in the bracket will need an anchor. If your ceilings are made of wood, you may simply screw the brackets in place. When drilling into the ceiling, always use safety goggles to keep debris out of your eyes. Screw the hollow wall anchor to the right after inserting it into the holes.

Using your hand, push the anchor into the plaster until the rear teeth catch. Tighten the screws to the right using a screwdriver or drill. Only the screw, not the anchor, should rotate. The anchor beneath the screw will be tightened as a result of this. Remove the screw from the anchor when it feels snug.

With a screwdriver or drill, spin the screw to the left to remove it. Carry on with the rest of the anchors in the same manner. Your drill should include a “reverse” button that allows you to turn it to the left as required.

Place the Bracket Over the Anchors and Screw


Placing the bracket against the ceiling is a good idea. Place a screw in one of the holes and gently turn it into the anchor below. Next, place the drill tip at the head of the screw and tighten it in place. Slowly set the drill on and allow it to spin the screw into position to the right.

While using the drill, you may wish to have a person hold the bracket. Check that the brackets are pointing in the direction you want the rod to be held.

Put the Curtain on the Rod and Hang

You should slide the curtain over the pole. If you’re using the type with eye holes, move back and forth between front and rear to pleat the curtain and hang it correctly. Install the end caps and suspend the rod by hooking it between the brackets and securing it with the end caps.

When putting on the curtain, may it be a sheer curtain, you must first be sure to move the rod into the front and out the back. Then through the rear and out the front to conceal the bracket. This will produce a concave appearance, which you may conceal by sliding it around the bracket.

In certain instances, you may have to reinstall the rod before reinstalling the end caps.

Tighten the Screws Over the Rod

Your brackets are likely to contain screws that assist keep the rod in place if you have to unscrew the end caps to pull the curtain into position. Gently tighten them with a screwdriver or drill to prevent the rod from sliding around.


Get Our Newsletter!

Subscribe to get the healthiest update!